Civil Engineering facts | Articles, Jobs & Infrastructure Insights

  HOW TO CHECK GUNIA (TRY SQUARE)IN THE WALL ======================================================================= Hi guys today i am going to tell you about above topic so guys before starting the topic i wanna say that if you didn't subscribe our blogger so enter email and follow as you can subscribe  us on YouTube to watch video about civil engineering and you can watch video about this topic i will send link in this post at the end so lest start the topic -- What is gunia - while construction of walls sometime walls move out from the straight line so this is called gunia in wall if our walls r in the line.so we have to calculate gunia in wall.we will remove it with the help of TAP. this is very important question for interviewer they ask how to resolve gunia problem without use any tool so this is the method called 3,4,5 we do it with the help of inch tap.   so guys i am giving you link of this video you can watch it in my YouTube channel...

   Civil Engineers should know these points at site work =================================================================== Hi guys today i am going to tell you about above topic so guys before starting the topic i wanna say that if you didn't subscribe our blogger so enter email and follow as you can subscribe  us on YouTube to watch video about civil engineering and you can watch video about this topic i will send link in this post at the end so lest start the topic -- Civil engineers These points are as follows- 1.Parapet wall height should be less than 1.2 meter. 2.Water cement ratio should not exceed 0.45 in M20 and 0.50 in M10/M15. 3.Initial setting time of cement is 30 minutes and final setting time is 10 hours-600 minutes 4.sanitary pipes and electrical conduits will not installed between columns and beams 5.1 chain bar provide in every 1 m² Area spacing not more than 1 meters. 6.Mini diameter of chain bar 12mm. 7.Lapping o...

How to calculate Cement Sand in Plaster       ===================================== Hi guys today i am going to tell you about above topic so lets start-  RATIO = 1:6                                                         where -1= Cement             6 = Sand Thickness of Plaster = 12 mm   Note-  1- Cement Mortar ratio for wall plastering 1 :6.             2- Cement mortar ratio for ceiling plastering 1 :4.   3- Plastering thickness should not be  more than 12 - 15mm   if there is need for an additional coat do not do that at one go. 4 - Ensure you are using a good quality cement. 5 - Must check the manufacturing date of cement it should not be  more than 3 months old.       ...

                       Different Conversion Of Units      ➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤              Hi guys today i am going to tell you about above topic so lets start-   1.➤                        1 Meter = 3.28 Feet   2.➤                       1 Meter = 39.37 inches  3.➤                        1 Meter = 100 Cm                                        4.➤                       1 Meter = 1000 mm  5.➤                        1 Feet = 12 inches ...

     👉 How to calculate Cement Sand & Aggregate                                                Quantity in Concrete 👈 ➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤ HI guys today i am going to talk about above topic so lets start-                        M:20 ⇨1:1.5:3 ⇛ sum =5.5                                                 where M = Mix                                                              1 = cement                                   ...

  👉 HOW TO CALCULATE No.OF BRICKS &QUANTITY                      OF CEMENT,SAND IN MORTAR 👈 --------------------------------------------------------------------------------------------------------------------------             Hi👋 guys today i am going to tell you about above topic so lets start- Mortar thickness = 10 mm                                                                                         Ratio = 1:6 👉 sum = 1+6 =7                                                                 ...

                                            Hi guys today i am going to talk about             BASIC MAIN POINTS  FOR CIVIL ENGINEERS 1. Brick water absorption not less than 15% -20%. 2. Thickness of plaster not more than 12mm. 3. Minimum thickness of slab is 125mm-150mm. 4. Should be Know difference b/w Main bar &         Distribution bar. 5. Knowledge about LAYOUT. 6. Drawing read must. 7. Types of foundation should be know. 8. Free fall of concrete is allowed maxi 5ft. 9. Should be know difference b/w A class Brick B class Brick. 10. Weight of cement bag -50kg and unit weight 1440. 11. Lapping is not allowed more than 36mm. 13. Steel bar in slab not be less than 8mm.Main bar 10mm plan bar        Distribution bar  not be less tha...